D-NWG-FN-23 MCQs
D-NWG-FN-23 TestPrep
D-NWG-FN-23 Study Guide D-NWG-FN-23 Practice Test
D-NWG-FN-23 Exam Questions
killexams.com
Dell Networking Foundations 2023
https://killexams.com/pass4sure/exam-detail/D-NWG-FN-23
What accurately describes the Simple Network Time Protocol (SNTP)?
Time synchronization algorithms are more complex and account for clock drift
Implemented on a Dell EMC Network OS 9 and OS 10
SNTP devices can act as both clients and servers
Client makes sudden changes to adjust the time
In IPv6 addressing, what refers to four binary characters?
Byte
Bit
Nibble
Block
Which command is used to prevent STP learning on a port that is connected to a server?
#able spanning-tree
#spanning-tree security
#spanning-tree portfast
#spanning-tree off
What action needs to be performed to enable SSH on a new switch?
Enable web services
Create a key pair using the crypto commands
Update the switch to the latest firmware
Disable telnet access
Which of the following is an IPv4 address?
A. 224.0.0.3/8
B. 172.16.225.0/23 C. 10.0.0.255/16 D. 192.168.0.3/30
A VLAN has been configured to have an IPv6 address and a stateless address autoconfiguration for clients. Which IPv6 address prefix will the default gateway have on a client?
A. fd01::/64 B. fe08::/64 C. fe80::/64 D. ff02::/8
A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links.
The other path is comprised of two 1 Gb and two 100 Mb links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.
Which corrective action must be taken on the switch infrastructure to correct this issue?
Manually specify the OSPF Router ID on each switch within the path.
Break the paths into multiple OSPF areas.
Change the reference speed used by OSPF in cost calculations on all switches within the path.
Switch all routing protocols to RIPv2.
Which command shows active telnet sessions on Dell N-Series switches?
Show hosts
Show sessions
Show users accounts
Show line telnet
What criteria is used to determine STP root elections?
Highest Port Numbers
Lowest Router ID
Lowest Bridge ID
Highest Bandwidth
What is a valid subnet mask?
A. 0.0.255.255
B. 255.255.0.128
C. 255.255.255.255
D. 255.256.255.0
Which command enables the read-write network monitoring community string?
#snmp-server community public ro
#snmp-server community netmon rw
#snmp-server community private wr
#snmp-server community public read
console#show interfaces switchport te1/0/1 Port: Te1/0/1
VLAN Membership Mode: General Mode Access Mode VLAN: 1 (default) General Mode PVID: 9 General Mode Ingress Filtering: Enabled General Mode Acceptable Frame Type: Admit All
General Mode Dynamically Added VLANs: General Mode Untagged VLANs: 1, 9 General Mode Tagged VLANs: 10-11 General Mode Forbidden VLANs: Trunking Mode Native VLAN: 1 (default)
Trunking Mode Native VLAN Tagging: Disabled Trunking Mode VLANs Enabled: All
Private VLAN Host Association: none Private VLAN Mapping: Private VLAN Operational Bindings: Default Priority: 0 Protected: Disabled console#
What VLAN will untagged ingress traffic be assigned?
VLAN 20
VLAN 9
VLAN 10
VLAN 1
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?
A. MXL B. M6220 C. M6348
D. M8024-K
What is administrative distance value for default static routes?
0
1
10
20
What accurately describes the Network Time Protocol (NTP)?
Implemented on a Dell EMC Network OS 6.
Time synchronization algorithms do not account for clock drift
Client synchronizes among a set of distributed time servers.
Client makes sudden changes in time to keep synchronized.
What accurately describes the comparison between stacking and VLT?
VLT allows for more physical devices to appear as one virtual device than stacking does.
Stacked switches share a common control plane while VLT peers maintain their own control plane
Stacked switches and VLT peers allow ??single pane of glass?? management by maintaining a single control plane.
Both VLT and stacking allow devices to use different versions of firmware provided that the switch family/series is the same.
KILLEXAMS.COM
Killexams.com is a leading online platform specializing in high-quality certification exam preparation. Offering a robust suite of tools, including MCQs, practice tests, and advanced test engines, Killexams.com empowers candidates to excel in their certification exams. Discover the key features that make Killexams.com the go-to choice for exam success.
Killexams.com provides exam questions that are experienced in test centers. These questions are updated regularly to ensure they are up-to-date and relevant to the latest exam syllabus. By studying these questions, candidates can familiarize themselves with the content and format of the real exam.
Killexams.com offers exam MCQs in PDF format. These questions contain a comprehensive
collection of questions and answers that cover the exam topics. By using these MCQs, candidate can enhance their knowledge and improve their chances of success in the certification exam.
Killexams.com provides practice test through their desktop test engine and online test engine. These practice tests simulate the real exam environment and help candidates assess their readiness for the actual exam. The practice test cover a wide range of questions and enable candidates to identify their strengths and weaknesses.
Killexams.com offers a success guarantee with the exam MCQs. Killexams claim that by using this materials, candidates will pass their exams on the first attempt or they will get refund for the purchase price. This guarantee provides assurance and confidence to individuals preparing for certification exam.
Killexams.com regularly updates its question bank of MCQs to ensure that they are current and reflect the latest changes in the exam syllabus. This helps candidates stay up-to-date with the exam content and increases their chances of success.