H35-210_V2.5-ENU MCQs and Practice Test

https://killexams.com/pass4sure/exam-detail/H35-210
Download PDF for H35-210
_V2.5-ENU"/>


H35-210_V2.5-ENU MCQs H35-210_V2.5-ENU TestPrep

H35-210_V2.5-ENU Study Guide H35-210_V2.5-ENU Practice Test H35-210_V2.5-ENU Exam Questions


killexams.com


Huawei


H35-210_V2.5-ENU


Huawei HCIA-Access V2.5


https://killexams.com/pass4sure/exam-detail/H35-210

Download PDF for H35-210
_V2.5-ENU




Question: 11


The total downstream bandwidth of the 10G EPON PON port is the sum of the EPON downstream bandwidth and the 10G EPON downstream bandwidth.


  1. TRUE

  2. FALSE




Answer: B

Question: 12

Which of the following statements about DHCP is wrong?


  1. Multiple DHCP servers are not allowed in the network at the same time, because multiple servers will respond at the same time, and the client cannot choose an address

  2. The Discover message between the DHCP Relay and the DHCP server is a unicast message

  3. If the client gives up the current IP address, uses the DHCPRELEASE message to notify the server, and the server reclaims this address for the next use.

  4. The packet exchanges experienced by DHCP to obtain an address normally include Discover, offer, Request and ACK




Answer: B

Question: 13

A VLAN service template is a set of service-related parameters in VLAN attributes. After a VLAN is bound to a service template, the VLAN has the attributes defined in the template, which is an efficient way to configure VLAN.


  1. TRUE

  2. FALSE




Answer: A

Question: 14

In-band network management and out-band network management can use the same network segment.


  1. TRUE

  2. FALSE




Answer: B

Question: 15

Which of the following commands can be used to confirm the auto-discovered board?


  1. board prohibit

  2. board reset

  3. board confirm

  4. board add




Answer: C

Question: 16

If the ONT is added on the GPON port by confirmation, what functions need to be enabled on the OLT?


  1. GPON line encryption

  2. PON port FEC function

  3. ONT auto-discovery

  4. POE function




Answer: C

Question: 17

In the GPON network, the long-lasting ONT will cause which of the following results?


  1. All business is normal, no impact

  2. Other ONT under the same PON port are disconnected

  3. Other ONT under the entire OLT are disconnected

  4. All of the above are possible




Answer: B

Question: 18

If the GPON optical module type is Class C+, how much value of its receiving sensitivity?


  1. 7dBm

  2. 3dBm

  3. -32dBm

  4. -12dBm




Answer: C

Question: 19

What is the pigtail type of the PON optical port?


  1. FC

  2. SC

  3. SL

  4. LC




Answer: B

Question: 20

Access Controller access domain controller: Provides the automation capability of access equipment.


  1. TRUE

  2. FALSE




Answer: A

Question: 21

eSight supports the unified management of Huawei servers, storage, virtualization, switches, routers, VLANs, firewalls, PON, eLTE, unified communications, telepresence, video surveillance and other equipment, as well as application systems and equipment room facilities, and pre-integrated with HP, Management capabilities of third-party mainstream devices such as Cisco and H3C.


  1. TRUE

  2. FALSE




Answer: A

Question: 22

If the PON system is regarded as a black box, the external interfaces presented by the OLT and ONU are mainly Ethernet interfaces, and the GEM encapsulation and decapsulation take place inside the PON system.


  1. TRUE

  2. FALSE




Answer: A

Question: 23

Which bit in the Flags field of an IP packet indicates whether the packet can be fragmented?


  1. MF

  2. DF

  3. ToS

  4. Reserved bit 0




Answer: B

Question: 24

What protocol does the FTP protocol run on?


  1. UDP

  2. TCP

    c. IP

  3. ARP




Answer: B

Question: 25

Which of the following statements is true?


  1. Compared with the shared hub, a port of the LAN switch can be said to be a separate collision domain.

  2. When the LAN Switch receives a packet containing an unrecognized MAC address, it directly sends the packet back from the port it received.

  3. The LAN Switch may not recognize the MAC address, but must recognize the IP address.

  4. The LAN Switch mainly searches for the corresponding IP address according to the MAC address of the data packet to realize the forwarding of the data packet.




Answer: A

Question: 26

When the Access port of the Ethernet switch receives a packet with a tag, which of the following processing behavior is correct?


  1. When the VLANID is the same as the default VLANID, the packet is received.

  2. Strip the frame's PVID Tag first, and then receive it.

  3. When the VLANID is different from the default VLANID, the packet is received.

  4. Receive the message and tag it with the default VA




Answer: A

Question: 27

Which of the following options can effectively reduce the size of routing table entries?


  1. Deploy BFD to accelerate network monitoring

  2. Route Aggregation

  3. Divide VLAN

  4. Increase the update frequency of dynamic routing




Answer: B

Question: 28

Based on the principle of high board versatility, the MA5800 can use the service board of the MA5608T.


  1. TRUE

  2. FALSE




Answer: A

Question: 29

After the GEM Port bears the service, it must be mapped to the T-CONT unit for uplink service scheduling. Each ON supports multiple T-CONT, and can select different types of T-CONT according to different service types.


  1. TRUE

  2. FALSE



Answer: A

Question: 30

In the downstream direction of GPON, due to the broadcast mode, all ONU can receive the same data, and in the upstream direction, due to the same optical splitter, the data of one branch fiber can also be received by another branch fiber.


  1. TRUE

  2. FALSE




Answer: B


KILLEXAMS.COM


Killexams.com is a leading online platform specializing in high-quality certification exam preparation. Offering a robust suite of tools, including MCQs, practice tests, and advanced test engines, Killexams.com empowers candidates to excel in their certification exams. Discover the key features that make Killexams.com the go-to choice for exam success.



Exam Questions:

Killexams.com provides exam questions that are experienced in test centers. These questions are updated regularly to ensure they are up-to-date and relevant to the latest exam syllabus. By studying these questions, candidates can familiarize themselves with the content and format of the real exam.


Exam MCQs:

Killexams.com offers exam MCQs in PDF format. These questions contain a comprehensive

collection of questions and answers that cover the exam topics. By using these MCQs, candidate can enhance their knowledge and improve their chances of success in the certification exam.


Practice Test:

Killexams.com provides practice test through their desktop test engine and online test engine. These practice tests simulate the real exam environment and help candidates assess their readiness for the actual exam. The practice test cover a wide range of questions and enable candidates to identify their strengths and weaknesses.


thorough preparation:

Killexams.com offers a success guarantee with the exam MCQs. Killexams claim that by using this materials, candidates will pass their exams on the first attempt or they will get refund for the purchase price. This guarantee provides assurance and confidence to individuals preparing for certification exam.


Updated Contents:

Killexams.com regularly updates its question bank of MCQs to ensure that they are current and reflect the latest changes in the exam syllabus. This helps candidates stay up-to-date with the exam content and increases their chances of success.

Back to Home