Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) Latest Version
https://killexams.com/pass4sure/exam-detail/NCP-MCI
Question: 41
Administrator is creating a Windows 10 VM that will be used for a virtual desktop template. After creating the VM and booting to the ISO, the administrator is unable to install Windows and receives the following error.
What steps does the administrator need to take to install the OS?
Load the Nutanix VirtIO Serial Bus Driver.
Load the VirtIO Network Ethernet Adaper.
Load the Nutanix Virtual Balloon Driver.
Load the Virtual SCSI pass-through controller.
Question: 42
An administrator has been asked to enable block awareness and increase the fault tolerance to FT2 on a Nutanix AHV cluster with the following configuration:
Four blocks
One node per block
Will the administrator be able to accomplish these tasks?
No-Fault tolerance changes are not supported.
Yes-FT2 requires a minimum of three nodes.
Yes-Block awareness requires a minimum of three blocks.
No-FT2 requires a minimum of five nodes.
Question: 43
An administrator wants to replace and old node with a node of newer generation in a 3-node cluster. The administrator has already chosen the appropriate node. But unable to remove it from the cluster. Why is the Remove Host option not shown in the exhibit?
The host needs to be placed into maintenance Mode before.
It is only possible to remove a host from a cluster using CLI.
It is not possible to remove a node from a the cluster using Prism Central
It is not possible to remove a host from a 3-node cluster.
Question: 44
In the event of a disk failure, which process will immediately ad automatically scans Cassandra to find all data previously hosted on the failed disk, and all disks in that node?
Curator
Stargate
Genesis
Prism
Question: 45
An administrator wants to receive an environment summary report when a host failure occurs. Which action would address the administrator???s need?
Enable App Discovery
Edit report schedule
Configure an alert policy
Create a playbook
An alert policy can be configured to send out an environment summary report when a host failure occurs. This can be done by creating a policy that triggers an alert whenever a host fails and then configuring the policy to send out a report that provides a summary of the environment in which the failure occurred. This will allow the administrator to quickly get a view of the environment after a failure occurs, allowing them to take the necessary steps to address the issue.
Question: 46
An administrator needs to increase bandwidth available to the AHV host and to the CVM. How should the administrator complete this task?
In Prism, update vs0 to change the configuration to Active-Active.
Use manage-ovs commands to update br0 change the configuration to Active-Active.
In Prism, create a vsl interface and add any remaining uplinks.
Use manage-ovs commands to create br1 and add any remaining uplinks
Question: 47
An Administrator has been asked to deploy VMs using a specific image. The image has been configured with settings and applications that will be used by engineering to develop a new product by the company.
The image is not available on the desired cluster, but it is available in other cluster associated with Prism Central.
Why isno???t the image available?
The image bandwidth policy has prevented the image upload.
The cluster should be removed from all categories.
The cluster has not been added to the correct category
The image placement policy was configured with enforcement.
When a placement policy is enforced, images are only allowed to be deployed on clusters that are part of categories that are associated with the policy. If the desired cluster is not associated with the policy, then the image will not be available for deployment.
Question: 48
An administrator has an AHV cluster that is comprised of 4 nodes with the following configuration in each node: CPU:2 each 2.4GHz, 12 core
Memory: 256GB Disk: 6 each 1.92 SSD
A VM with 16 vCPUs and 96GB of RAM is being created on the cluster.
How should the administrator configure the VM to assure optimal performance?
With an affinity policy
With memory overcommit
With 2 vNUMA nodes
With Flash Mode enabled
The best way to configure the VM for optimal performance is to set it up with 2 vNUMA nodes. This will ensure that the VM is configured to take advantage of the CPU and memory resources available in each node, and it will also ensure that all of the cores are utilized for the best performance. Additionally, the administrator should ensure that the VM has an affinity policy set up so that the vCPUs are evenly distributed across the four nodes. Finally, Flash Mode should be enabled in order to take advantage of the high-performance SSDs that are available in the cluster
Question: 49
On a Nutanix cluster, what does Network Segmentation refer to?
A distributed firewall for security VM to VM traffic.
Physically separating management traffic from guest VM traffic.
Isolating intra-cluster traffic from guest VM traffic.
Isolating management traffic from storage replication traffic.
Answer: D
Question: 50 Refer to the exhibit.
An administrator is adding a new node to a cluster. The node has been imaged to the same versions of AHV and AOS that the cluster running, configured with appropriate IP addresses, and br0-up has been configured the same the existing uplink bonds
When attempting to add the node to the cluster with the Expand Cluster function in Prism, the cluster is unable to find the new node.
Based on the above output from the new node, what is most likely the cause of this issue?
The ports on the upstream switch are not configured for LACP.
The existing and the expansion node are on different VLANs.
There is a firewall blocking the discovery traffic from the tlu
LACP configuration must be completed after cluster expansion
KILLEXAMS.COM
Killexams.com is a leading online platform specializing in high-quality certification exam preparation. Offering a robust suite of tools, including MCQs, practice tests, and advanced test engines, Killexams.com empowers candidates to excel in their certification exams. Discover the key features that make Killexams.com the go-to choice for exam success.
Killexams.com provides exam questions that are experienced in test centers. These questions are updated regularly to ensure they are up-to-date and relevant to the latest exam syllabus. By studying these questions, candidates can familiarize themselves with the content and format of the real exam.
Killexams.com offers exam MCQs in PDF format. These questions contain a comprehensive
collection of questions and answers that cover the exam topics. By using these MCQs, candidate can enhance their knowledge and improve their chances of success in the certification exam.
Killexams.com provides practice test through their desktop test engine and online test engine. These practice tests simulate the real exam environment and help candidates assess their readiness for the actual exam. The practice test cover a wide range of questions and enable candidates to identify their strengths and weaknesses.
Killexams.com offers a success guarantee with the exam MCQs. Killexams claim that by using this materials, candidates will pass their exams on the first attempt or they will get refund for the purchase price. This guarantee provides assurance and confidence to individuals preparing for certification exam.
Killexams.com regularly updates its question bank of MCQs to ensure that they are current and reflect the latest changes in the exam syllabus. This helps candidates stay up-to-date with the exam content and increases their chances of success.